BSU03 - Battery Support Unit (Charger) - 101.24 CNT

The BSU03 - Battery Support Unit (Charger) - 101.24 CNT is a 100 A high power CONNECTED charger with inverter technology. It allows to keep a 6 V, 12 V and 24 V lead or lithium battery (Lithium-ion “standard” + Lithium-iron Phosphate) at a perfectly stabilized voltage during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market.

Supplied with cables (5 m - 25 mm2)

4 OPERATING MODES

Charge: for 6, 12 or 24 V Lead or Lithium batteries from 5 to 1200 Ah.
Diagnostic: supports up to 100 A for 12 V or 24 V batteries in vehicles in the diagnostic phase, in maintenance workshops.
Showroom: provides power compensation when using the electrical accessories of a demonstration vehicle. It also manages the optimal charging of the battery.
Tester: Allows you to check the battery voltage, evaluate the starting system (starter + battery) and the condition of the vehicle’s alternator

AUTOMATIC CHARGE

Extends the life and performance of Lead (gel, AGM, liquid, calcium, etc.) and Lithium batteries (Lithium-ion "standard" + Lithium-iron Phosphate).
Specific charging curve in 8 steps (lead battery) or 9 steps (lithium-iron phosphate battery) without supervision.
Recovers deeply discharged batteries >2 V (automatic SOS Recovery).

TECHNOLOGIES & ADVANCED FUNCTIONS

FV Flexible Voltage, the charger operates with a supply voltage between 85 and 265 V.
"Auto-Detect" function automatically starts a charge when a battery is connected to the charger.
"Auto-Restart" function in the event of a power failure with memory of the settings.
Cable inspection and calibration
Locking, avoids the risk of improper handling, ideal for garages and exhibition halls.
Up to 12 charging profiles available, including the Easy profile for simplified charging suitable for all lead batteries.

SAFETY

Protection of the vehicle’s on-board electronics: protection against short circuits, polarity reversal and overcharging. Spark prevention system.
Interchangeable fusible which protect against misuse.
Temperature sensor to prevent internal electronics overheating.

ADVANCED INTUITIVITY

Durable case with shock and vibration absorbing pads.
Low height (13 cm) for the loader to pass under a vehicle.
Intuitive interface available in 22 languages.

6 V, 12 V and 24 V lead or lithium battery (Lithium-ion “standard” + Lithium-iron Phosphate)

Manufactured in conformity with the following directives :

Low Voltage Directive 2014/35/EU of 2014.02.26
EMC (Electromagnetic Compatibility) Directive 2014/30/EU of 2014.02.26
RoHS2 Directive 2011/65/EU of 2011.06.08
Annex II of RoHS2 Directive 2015/863 of 2015.03.31

In compliance with the harmonized standards :

EN 60335-1 : 2012 + A1 : 2019 + A2 : 2019 + A14 : 2019
EN 60335-2-29 : 2021 + A1 : 2021
EN IEC 55014-1 : 2021
EN IEC 55014-2 : 2021
EN IEC 61000-3-2 : 2019 + A1 : 2021
EN 61000-3-3 : 2013 + A1 : 2019 + A2 : 2021
EN 62233 : 2008


AVDI Common	J2534 PassThru driver
ABPROG Programmer	ABPROG Programmer Upgraded
Bikes, Snowmobiles and Water Scooters	BMW/Mini (Online)
Chrysler, Dodge, Jeep	DAF
Daihatsu	Engine Control Unit Programming tool
Fiat/Alfa/Lancia/FCA	Ford/Mazda
Honda (Online)	Hyundai/KIA
Hyundai/KIA Online	Jaguar/Land Rover
Mazda (Online)	Mercedes/Maybach/Smart
Mercedes/Maybach/Smart (Online)	Merecedes FBS4 Manager
Mercedes Trucks	MODI - Mobile Diagnostics
Mitsubishi	Nissan/Infiniti
Opel/Vauxhall	Peugeot/Citroën
Peugeot/Citroën Online	Porsche
Porsche Online	Protag Transponder Tool
Renault/Dacia	Renault/Dacia (Online)
Subaru (Online)	Suzuki
Tesla	Toyota/Lexus/Scion
Toyota/Lexus/Scion Online	VAG
VAG (Online)	VIN Reader
Volvo	ABRITES RH850/V850 Programmer
FCA (Online)

30% Off

30% Off

BSU03 - Battery Support Unit (Charger) - 101.24 CNT